DAHLE ShredMATIC® 150 – Autofeed Shredder Cross-Cut
- 0 Review(s)
- Add your review
- instock
Universal document shredder with automatic paper feeder and particle cut P-4
- Intelligent autofeed document shredder with automatic paper feeder for desk-side use
- Oil- and maintenance-free operation
- Extra-small particles allow for less frequent emptying
- Integrated photoelectric sensor for automatic start-stop function enables fast availability and safe use
- Automatic paper reverse function clears excess paper
- Convenient feeding and reversing function for manual control
- Automatic safety shut-off when the waste container is full or the door is open
- Inspection window as optical waste level indicator
- Autofeed function shreds up to 150 sheets (80 gsm) in a single load
- Overload indicator
- Manual feed of 7-9 sheets possible
- Overheating protection with optical indicator
- Pull-out waste container
- Convenient casters for greater mobility
| Entry width in mm | 220 |
|---|---|
| Sheet capacity (80g/sqm)* | 1 – 150 sheets |
| Particle size (in mm) | 4 x 12 mm |
| Run time | 90min |
| Autofeed run time | 90min |
| Cards | yes |
| Paper clips / Staples | yes |
| Waste collection volume (in l) | 25 l |
| Noise level when idle (db(A)) | 60 dB(A) |
| Power consumption | 180 W |
| Power supply | 230 V |
| Speed (m/min) | 1.8 |
| Cut type | Particle cut |
| Paper feeder | automatic |
| Security level | P-4 |
| Material to be cut | Cards Paper |
* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz, 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.
Price
