DAHLE ShredMATIC® 300 P5 – Autofeed Micro Cut Shredder
- 0 Review(s)
- Add your review
- instock
Professional document shredder with manual paper feeder and P5 particle cut
- Convenient deskside document shredder
- Innovative MHP® cutting rollers (Matrix High-Performance): high-quality compound steel rollers for a guaranteed long service life
- Patented manufacturing process conserves resources by using significantly less raw material compared to production of traditional cutting rollers
- Higher performance and greater convenience thanks to MHP cutting rollers
- With automatic motor cut-out after 10 minutes without use
- Integrated photoelectric sensor for automatic start-stop function enables fast availability and safe use
- Automatic paper reverse function clears excess paper
- Convenient feeding and reversing function for manual control
- Automatic safety shut-off when the waste container is full or the door is open
- Inspection window as optical waste level indicator
- Autofeed function shreds up to 300 sheets (80 gsm) in a single load, with lockable paper feeder
- Overload indicator
- Manual paper feeder, 9-11 sheets of paper (80 gsm)
- Powerful motor ensures high performance and longer run times
- Convenient swivel castors for greater mobility
| Entry width in mm | 220 |
|---|---|
| Sheet capacity (80g/sqm)* | 11 – 300 sheets |
| Particle size (in mm) | 2 x 15 mm |
| Run time | 480min |
| Autofeed run time | 480min |
| Cards | yes |
| Paper clips | yes |
| Waste collection volume (in l) | 40 l |
| Noise level when idle (db(A)) | 60 dB(A) |
| Power consumption | 650 W |
| Speed (m/min) | 2.5 |
| Cut type | Particle cut |
| Paper feeder | automatic |
| Security level | P-5 |
| Material to be cut | Cards Paper |
* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz, 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.
Price
